? 電機形式：普通、防爆、變頻調速、變頻防爆、氣動馬達 電機選配件：FTC熱保護、降噪型、衛生防護罩型 電源選擇：380V/50FZ、220V/60FE、440V/50HZ 乳化機選配容器：適合于各種不同規格的容器（釜、罐） 乳化機選配：機封平衡罐、排污閥、變頻器箱柜、推車 乳化機表面處理：拋光、耐磨、硬化熱處理 進出口聯結形式：法蘭、螺紋、卡箍 ? | Motor form: Ordinary, Explosion-proof, variable frequency speed regulation, Variable frequency explosion-proof, Pneumatic motor Motor accessories: FTC thermal protection, Noise reduction type, Sanitary protective cover type Power supply selection: 380V/50FZ, 220V/60FE, 440V/50HZ Emulsifier optional container:?Suitable for containers of various specifications (kettle, tank) Emulsifier optional: Liquid storage balance tank, Drain valve, Frequency converter, Electric control box, Trolley Emulsifier surface treatment: Polishing, Wear resistance, Hardening heat treatment Import and export connection forms: Flange, Thread, Clamp |
備注Remarks: * 表中流量范圍是指介質為“水”時測定的數據，表中所列型號的標準出口壓力≤0.15MPa； * 如采用循環工藝，建議與間歇式高剪切分散乳化機配合使用； * 如有高溫、高壓、中高粘度、易燃易爆、腐蝕等特殊工況時，須提供詳細準確的參數； * 對流動性較差的介質，建議在入口處選用流量相匹配的泵輸送，輸送泵的壓力≤0.2MPa； * 本表數據如有更改，恕不另行通知，正確參數以提供的實物為準。 *The flow range in the table refers to the data measured when the medium is "water", and the standard outlet pressure of the models listed in the table is ≤0.15MPa; *If using a cyclic process, it is recommended to use it in conjunction with an intermittent high shear dispersing emulsifier; *If there are special working conditions such as high temperature, high pressure, medium high viscosity, flammability, explosiveness, corrosion, etc., detailed and accurate parameters must be provided; *For media with poor fluidity, it is recommended to use a pump with matching flow rate at the inlet for transportation, and the pressure of the conveying pump should be ≤0.2MPa; *The data in this table is subject to change without prior notice, and the correct parameters are based on the actual product provided. |
